tomtom speed cameras UPDATED [21.07.09][RETAIL]

[00DUDE]

THESE CAMS ARE A COMBINATION OF MY OWN SUBSCRIPTIONS TO TOMTOM AND THOSE COMPILED BY THE MAVERICK, ALL CREDIT FOR THESE CAMS GO TO THE MAVERICK FOR THE TIRELESS WORK HE DOES WITHIN THE TOMTOM COMMUNITY AND FOR THE HARD WORK HE PUTS INTO COMPILING AND UPDATING THE META.TXT FILES

please note
ALWAYS make a backup of your tomtom before you tinker with it. either by using tomtom home or just by copying the entire contents of your memory card or device to your pc.

NEW SPEED CAMS 30.07.09
=====================

Latest Version

Safety_Cam_NZ_TomTom 1348
Safety_Cam_AT_TomTom 3214
Safety_Cam_BE_TomTom 3215
Safety_Cam_DE_TomTom 3216
Safety_Cam_ES_TomTom 3217
Safety_Cam_FI_TomTom 3218
Safety_Cam_FR_TomTom 3219
Safety_Cam_UK_TomTom 3220
Safety_Cam_IT_TomTom 3221
Safety_Cam_NL_TomTom 3222
Safety_Cam_NO_TomTom 3223
Safety_Cam_PT_TomTom 3224
Safety_Cam_SE_TomTom 3225
Safety_Cam_PL_TomTom 3226
Safety_Cam_CZ_TomTom 3227
Safety_Cam_ZA_TomTom 2871
Safety_Cam_AU_TomTom 3229
Safety_Cam_BR_TomTom 3230
Safety_Cam_US_Canada_TomTom 3231
Safety_Cam_NL_Premium 3143
Safety_Cam_FR_Premium 3144
Safety_Cam_DE_Premium 3145
Safety_Cam_UK_Premium 3146

http://rapidshare.com/files/261808579/30.07.09.rar

===============================================

These Cameras will work for any map covering these countries.
Australia, Austria, Belgium, Czech Republic, Finland, France, Germany, Italy, Netherlands, Norway, Poland, Portugal, South Africa, Spain, Sweden & UK.
now includes us and Canadian cams

to activate these cameras on your map copy and paste The two files .VER and .Ov2 for each camera into your map folder on your device or memory card and use alberts easy activator or benbbs's key gen to activate them

=========================================
benbbs

KEYGEN

http://rapidshare.com/files/240359914/ISO-8859-1__TomTom_Keygen_v3.1C.zip

META

http://rapidshare.com/files/250319161/ISO-8859-1__meta.rar

=========================================
alberts easy installer

 http://www.megaupload.com/?d=94JT300Z

=========================================

THE FOLLOWING IS A NOTE FROM MSUBEDAR AND THE CREDIT FOR IT IS RIGHTLY HIS.

ALSO NOTE
These Camera files I post up here are NOT POI's.... On most new Navcore's you cannot see them as a POI (However, on some older versions I have seen them visible as a POI), As these are original TomTom files, your tomtom NC will read them as originals after they have been patched to your device so it does not need to show them as a POI. Your TomTom will know what to do with them and automatically will add a warning beep etc which is something you can choose and change to which beep you want etc. BUT AGAIN, THESE FILES ARE NOT RECOGNIZED AS A POI. (For example if you also use SCDB Camera files or PocketGPS Camera's, you will notice that they are available as POI's so you have the normal settings available to you to change if you wish.)

Once the files have been patched to your device (.dct files created) then just put all the files in your map folder (.ver file not needed but no harm is done if you also put them in).

To check if they work: (Tip: I would just switch off any other camera files you may have in the POI section like PGPS or SCDB Camera's to avoid confusion while testing)

Create a route where you know you will be going past a Camera (To be sure, create the route so you are on the correct side of the road, in the same direction the Camera is facing) and in Route Summary, do a Demo of the Route (at 500% is fine) and if the camera shows up whilst its on the Demo and it beeps then you know everything is working.

HOPE THIS HELPS

[00DUDE]

new files added to post 1
25.07.09

[00DUDE]

new files added. note from now on all new updates will be placed in post 1 of this thread.

[00DUDE]

update time again fellas

[shef276]

hi guys, i would like to update my tomtom 700 but new to this, how do i put files, keygen and camera update on to my tomtom, i need to know right from begining never updated sorry to be a pain.
cheers.